Techniques used to produce Acid stain concrete by fabcrete

Acidity staining concrete countertops provides a one-of-a-kind finish unique for this process. Because countertops are usually smaller projects, acid stain may represent one of many color techniques used to produce beautiful kitchen, bathroom, desk and outdoor countertops.

Step one: Selecting the Correct Countertop Mix is tougher than it was previously. If you’re planning in order to acid stain concrete top, choose a countertop mix with under 10% fly ash. Travel ash affects reactivity as well as color development when acidity staining and causes colour variability in integrally coloured countertops. Direct Colors Cement Countertop Mix contains absolutely no fly ash and generating optimal acid staining outcomes.

Step 2: Not all Form Release is done Equal. DCI Countertop Form Discharge is colorless and simply leaves no trace of residue about the countertop surface. Other release agents such as oils or solvents may leave a film at first glance that makes acid discoloration impossible. Don’t use all of them. Remove the countertop in the forms and clean the top thoroughly with a answer of organic degreaser as well as water. Rinse and permit to dry.

Step 3: As well Smooth to stain? Pre-cast countertops in many cases are poured on melamine and may be too smooth in order to successfully acid stain. Sand the top with a 200-grit sanding mat to open the pores just before staining. Once clean as well as dry, apply either Acid Spot or Deco Gel Acid Stain towards the surface and allow for that appropriate activation time.

Apply acid concrete stain utilizing a pump-up sprayer or foam brush and also the deco gel with the foam brush, artist clean or plastic trowel. If your darker color is preferred, leave the stain on longer compared to minimum recommended processing period. When the color may be achieved, neutralize with the baking soda and drinking water solution, clean well as well as leave to dry.

Step four: Polishing or not Polishing? In the event that you’re polishing your counter top, apply the penetrating concrete sealer and permit to dry every day and night. Continue polishing with the 400-grit pad and beyond before desired finish is acheived. With regard to maximum protection and sturdiness, polish the concrete to a minimum of the 1500-3000 grit degree. If not, seal the top with one of our top quality polyurethane, polyurea or epoxy counter top sealers.

Concrete Countertop Ideas:

If you’re pouring the countertop, frame one or even two 1 ft. by 1ft. pieces for color and also to practice your technique. Sample sizes are for sale to acid stain, deco carbamide peroxide gel and penetrating lithium hardener sealer with regard to smaller projects and screening purposes. Visit our concrete countertop supplies page for the entire product line.

If you’re pouring several countertop pieces for installation within the same room, use a timer therefore the acid stain or deco carbamide peroxide gel processes on each item for the same period of time. Extra time on the concrete generally leads to a darker color.

When you are thinking about services of stained stamped concrete we can recommend http://www.fabcrete.com/concstain.html for thousands and good advice.