Pallavi Reddy

Petroleum waxes are soft colorless solids obtained from petroleum. Petroleum waxes are of three types, namely paraffin wax, microcrystalline wax, and petroleum jelly. Although these waxes are slightly...

Phenolic resins or phenol formaldehyde resins are the synthetic polymers derived from the reaction between formaldehyde and phenol. Phenolic resins were regarded as the first commercial resins used in...

Plastic foam is synthetic resins, which can be changed to sponge-like mass, acting as close-cell structure or open-cell structure. The plastic foam generally includes urethanes, polyurethanes, vinyl...

Plastics are organic compounds with high molecular weight, which consists of a wide range of synthetic organic compounds which can be molded into various shapes, due to malleability. Packaging is a...

Polyacrylamide is made up of acrylamide monomer and is water-soluble. It increases the viscosity of water and facilitates the flocculation of particles present in water.Polyacrylamide is used for...

Polybutadiene is a polymer formed by polymerization of 1, 3-butadiene. It is a synthetic rubber, which is mostly used in the production of tires, and also to enhance the resistance of polystyrene and...

Polyethylene naphthalate or PEN is a polyester derived from naphthalate-2, ethylene glycol, and 6-dicarboxylic acid. Although polyethylene naphthalate is similar to terephthalate (PET) chemically, it...

Polyethylene terephthalate is the most common plastic resin of polyester made from the combination of two monomers. Polyethylene terephthalate, also referred to as PET or PETE, is a remarkable cost...

The polyethylene terephthalate market is projected to boost an excellent sustainability during the forecast period (2017-2025). However, growing environmental pollution from the chemical and...

Polyphenylene ether (PPE) is produced by oxidative polycondensation of 2,6-dimethylphenol in the presence of a copper amine catalyst. It is a thermoplastic, linear, and non-crystalline polyether...

Polyphenylene Sulfide (PPS) is a semi-crystalline, high temperature engineering plastic, which is widely accepted across various industries for its remarkable features such as high mechanical...

Polyurethane-based adhesives are used in bonding solid and relatively inflexible substances and provides high UV resistance. Polyurethane polymers are formed by the reaction of isocyanate and a...

Polyvinylidene fluoride (PVDF) is a highly non-reactive thermoplastic fluoropolymer. It is chemically inert to most alcohols, acids, chlorinated solvents, and aromatic & aliphatic organic compounds...

Potassium formate, also known as potassium salt of formic acid is a white solid powder, which forms brine solution and low crystallization temperature. This is a non-hazardous element, which has a pH...

Poultry feed materials are referred to single or multiple ingredients that include raw or semi-processed or processed ingredients intended to feed poultry animals. Increasing demand for animal-based...