Dust collection system: Dust suppression systems save on operational expense

Dust collection system collects the unwanted dust from the air. This dust is produced by manufacturing processes and can be very deadly. The system works by collecting and containing the dust. Fog is used to make the particles larger and heavier and then these are collected on a surface. Timing is an important factor and the time it takes for the dust particles to collide with the water droplets has to be kept ideal.

Manufacturing units commonly use Agglomerative Dust Suppression (ADS) Systems, Fog Cannon, and High Wind Fencing to remedy the problem. Dust is a major problem at construction sites. When you are remodeling a building the dusty areas have to be contained. Contractors save on labor cost when they use dust suppression systems. These systems monitor the behavior of the dust as it becomes airborne. The dusty air is directed to a specific area so it does not contaminate other areas. Contractors build a nice impression with clients when they take care of the debris and dust in an efficient manner. They can get good referrals and boost their branding.

For small workshops, a simple wall barrier may be enough. Premade walls can be bought online at a reasonable cost. These walls can also be custom made to suit your requirement. Besides these air barrier systems, other solutions include plastic sheeting, floor and cabinet coverings, and shoe covers. You can seal off any area by using a dust collection system. Limit the dust to a single room to make the clean up job simpler and quicker.

Those who cannot invest in getting a temporary wall use large plastic sheets to cut off the area where the dust is produced. These plastic sheets may be helpful for small shops but for large manufacturing concerns a more reliable system is required. Workers in areas where dust is a hazard are also required to wear masks. If you are working with coal you can get diseases of the lungs and the airways.

The air quality can be degraded when the dust enters the ducts. These ducts will require more maintenance and you will need new components which mean unexpected expense. The ducts also need a sealant to protect the HVAC from the damaging dust. The OSHA-approved filters are often used at work sites to keep the air clean. When you hire a contractor to assess your need you can get the best available dust collection system on the market or get one custom made.

Find more on dust collection system/dust suppression systems here: http://bepengineering.com/