Difference between Cogged Belt & V Belt

A belt is a loop of adaptable material used to connect at least two rotating shafts mechanically, regularly parallel. Belts might be utilized as a foundation of movement, to transmit control effectively, or to track relative development.

Types of belts

Belts are arranged in many sorts as indicated by usage, position, and shape like level, V-belts, Conveyor belts, cogged belts, Link belts, Banded belts and so forth. You can save a large amount of money if you know when to replace the drive belt in your car. Checking it on a regular basis can keep you from getting stranded and spare you from astounding repair bills.

There are two main types of belts i.e. cogged belt and V belt that are commonly used as the mechanical belt. Let us know what actually they are!

V Belts

• V Belts are the standard type of belt for power transmission. They have a trapezoidal cross area, thus it is referred as the name "V", which was intended to wipe out the issue of belt slippage.

• A reaction of this outline implies that the higher the load, the more the belt wedges itself into the groove, which also increasing torque.

• V belts are generally utilized on fast and high torque drives on light, heavy industrial and car machines. These belts have outstanding length strength, have an extraordinary absorbing capacity and drive consistency. The scope of V Belts has distinctive segments specifically A, B, C, D and E.

Features of v belt:

• Made from high-performance polymers.

• High tenacity polyester cable cords.

• The unique process of heat stretching &, length stabilizing.

• Precision Built it - no matching required.

• One shot tensioning.

Cogged Belt

Cogged belts are suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required. Cogged belts have a progression of teeth or notches along the internal circuit which is intended to expand the belt's adaptability around a littler pulley wheel.

The cogged belt in some ways is as similar as the standard V-belt; only, it has a grooved base. Such grooves pave the way for a firm grip on gears and engine accessories, thus making the belt perfect for high-load applications. Like the standard V belt, the cogged belt must be replaced every three years or 36,000 miles.

This outline offers considerably more torque than a regular V belt at higher horsepower ratings.

Features of cogged belt

• Tooth Notches of cogged belts are constructed onto the belt during manufacturing, make this cogged belts well suited for drives with smaller diameter sheaves.

• Belt Edge is machined for even sheave groove contact resulting in less slip and wear.

• Flexible Cords are strongly bonded to the body of the cogged belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.

• If you want to purchase v belt or cogged belt than must contact Polydrive as they are one of the leading v belt and Cogged Belt Manufacturers & Supplier in Mumbai, India. Their main aim is to offer products of the best quality so that you can achieve optimum production, efficiency, minimum operating cost.

Read above article useful information & knowledge for you.