How to Improve Signal Strength on Netgear Wireless Router

Almost all networking devices, such as wireless routers, adapters, and access points, send/receive radio signals via the antennas. Some of the routers come with the external antennas that are visible, while some are contained internally. These antennas are helpful to maximize the radio signal strengths, but sometimes they cause interference and reduce the signals. If you’re using the Netgear wireless router and want to optimize the wireless range, you should try one of the following workarounds to improve the Wi-Fi range. Note – If you need the help of professionals when using the Netgear router, it’s highly advised to call on the Netgear wireless router technical support number.

Solution 1 - Positioning

Put your router in a central place instead of the corner. Some public wireless locations typically have the router attached to the ceiling or wall. So, you can improve the wireless range by positioning your router in a central location.

Solution 2 - Reduce obstacles

A straight line of sight between your router and the wireless device is perfect for a robust network connection. Some factors like wall thickness and many walls can reduce the signal strength. For instance, a metal filing cabinet can protect the radio waves.

Solution 3 - Minimize interference

It refers to the cordless phones and other electronic appliances that have the radio waves in the similar range between 2.4G or 5 Gigahertz. Some wireless router and microwave ovens can also cause interference with the wireless connection. In most cases, interference can also encounter when the signal recoils off reflecting items. So, try to minimize the interference to get the proper internet connection.

Solution 4 - Check signal strength

It mainly relies on the position. Improving strength would relate at large, to a country area, instead of an urban or city area. If you have too high signal strength, it may be possible that your neighbors would access the wireless network. The strength of wireless signals half or quarter is perfect for the home network uses.

Solution 5 - Antennae type

Antennae don’t emit correspondingly in each direction. The antenna signal can be prevented and focused by a reflector. The focus of an antenna is either the directional or Omni-directional that can emit parallel all around, but are weaker downward or upward. An Omni-directional antenna is a directional antenna that emits powerfully in a particular direction. It’s usually a dish or flat panel. These can be used for point-to-point communications in which two antennas are focused openly at each another.

A directional antenna is an antenna that produces the most robust signal strength for nearest devices. If the distance is longer between the device and your router, you should be in the direction the beam is the dominant and unobstructed to get a signal. So, if you wish to receive the mighty signal strength, then you should notice these factors that can affect your wireless network. Other Considerations

If you’re unable to receive a good range of wireless signals when using the Netgear router and even can’t connect to the Wi-Fi network, it's recommended to look for the more possible workarounds. By dialing the Netgear router help number, you can directly consult the team of networking professionals who are always ready to assist the Netgear users with the best possible workarounds to resolve the router problems instantly and efficiently.

Although Netgear router is one of the best networking devices that lets the users access the Internet with the most robust connection, you may sometimes receive the weak signal strength that causes the wireless network to break down.