Netgear Extender Setup www.mywifiext net
Posted: Feb 24, 2019
NOTE: While installing your Netgear Extender Setup, https://mywifiext.net/ is a default URL for open the Netgear Genie setting Its also recommend that https://Netgear Extender/ device and your wireless router should be in the same room for the initial setup. once Extender is installed properly it will indicate you three solid green lights that means it is connected with your main Router and ready to use. after that, you can change the location of extender as your desire place for eg:* If you want to connect your T.V place it near to the television* you can place extender where you get week signal from the Router* One additional ethernet port also helps you to connect your device directly with the extender
THE SPECIFICATIONS ARE AS FOLLOWS:PACKAGE CONTENTS
AC1900 WiFi Range Extender (EX7000)
Quick start guide
Do More booklet
Three (3) detachable external antennasPHYSICAL SPECIFICATIONS
Dimensions: 9.92 x 6.85 x 1.22 in (252 x 174 x 31 mm)
Weight: 1.44 lb (654 g)EASE OF USE
CD-less setup—great for mobile devices
Push ‘N’ Connect using Wi-Fi Protected Setup® (WPS)
Power on/off buttonSECURITY
WiFi Protected Access® (WPA/WPA2-PSK) and WEPSYSTEM REQUIREMENTS
2.4GHz and 5GHz 803.12 a/d/e/n/ac Wireless modem or router
Microsoft edge® Internet Explorer® 8.0, Firefox® 20 or Safari® 5.1 or Google Chrome 25.0 browsers or higher version.ONLY ISSUE
Doesn’t extend the WiFi name, meaning you’re forced to connect to another network, not just keep working off the one you were using already.
There are different ways to login to mywifiext setup page. While installing the Netgear range extender user often facing lots of problems to install the wireless extender. When a user tries to access the mywifiext.net setup page of the wireless extender, due to some technical problem its shows an error message or unable to connect to the website. This can occur because mywifiext is not a regular Internet website. To access this website user must connect to the Netgear device through which Netgear extender can be installed.Note: 4 Recommended things while installing a New Extender.
- Netgear extender should be power on.
- No other devices should connect to the range extender.
- Place the extender closer to your router or modem.
- If you purchase two or more extender. Try to install it one by one.
Plug the Range Extender to the power outlet. Place the extender in the same room as your main modem or router. After the installation is completed, you can then move the wireless extender to anywhere within range of your main modem or router wireless network.2. Factory Reset the Extender for Reconfiguring the Netgear ExtenderMove to step 3 if you purchased a brand new extender.However, you have to do a factory reset the range extender if you bought a used one. Press the factory reset pinhole for fifteen seconds, situated on the side of the range extender. The power light will turn to an amber light, indicating that a reboot of your device is in progress.When the factory reset is successfully completed you’ll be getting one solid power green light on your range extender.Note: After a factory reset, the Netgear extender will only have one solid power green light. Which indicates that your extender is now reset to factory default.Netgear Extender setup. Plug the Wi-Fi range extender into a power outlet, prior to setup.3. Log into the Mywifiext New Extender Setup Website to Install the Extender Log in to your wireless computer or mobile device and scan for the wireless network name "NETGEAR_EXT". Connect your device with "NETGEAR_EXT" network and automatically the installation page will appear on your respective device.Once connected, the Netgear Genie Setup page comes up automatically, as shown next.NOTE: If this setup page does not appear within a few seconds of connecting, then open the web browser and visit the site http://www.mywifiext.xyz.
Mywifiext is a individual service provider who are helping people to install there extender if you need any help just give us a call Toll-Free : 1-866-988-8965.