200-101: Interconnecting Cisco Networking Devices Part 2

Interconnecting Cisco Networking Devices Part 2 exam covers approximately fifty to sixty questions that the candidate has to solve in time of seventy five minutes. The exam is by Cisco and the candidate get certification after passing the exam that provides ample of benefits.

200-101: Interconnecting Cisco Networking Devices Part 2 exam descriptive is given here for the candidates that have been enrolled or are planning to enroll themselves for this particular exam. The list provided is in accordance with the exam descriptive of the vendor.

The first main topic is LAN Switching Technologies that consist of twenty one percent in the exam, it includes the objectives given as, enhanced switching technologies, RSTP, PVSTP, EtherChannels, Configure and verify PVSTP operation, root bridge election and Spanning tree mode.

Twenty six percent of the 200-101: Interconnecting Cisco Networking Devices Part 2 exam course is covered by the next topic which is called IP Routing Technologies which consist of the objectives which are the boot process of Cisco IOS routers, verify operation status of a serial interface, Manage Cisco IOS files, Boot preferences, Cisco IOS image, Licensing, Show license, Change license, methods of routing and routing protocols, Administrative distance, Split horizon, Metric, Next hop, verify OSPF (multi-area), Neighbor adjacencies, OSPF states, Configure OSPF v2, Configure OSPF v3, Router ID, Understand LSA types and purpose, Configure and verify EIGRP, Feasible distance/feasible successors/administrative distance, Feasibility condition, Metric composition, Router ID, Auto summary, Path selection, Load balancing, Equal and Passive interface.

Only six percent is covered by the third section that s called IP Services that include, high availability (FHRP), VRRP, HSRP, GLC, Configure and verify syslog, Utilize syslog output and SNMP v2 & v3 which is very important component in the exam.

Thirty two percent of the200-101: Interconnecting Cisco Networking Devices Part 2 exam is covered by the topics called Troubleshooting which may include correct common network problems, netflow data, Troubleshoot and resolve spanning tree operation issues, Verify root switch, priority, mode is correct, port states and resolve routing issues, routing is enabled, routing table is correct, correct path selection and resolve OSPF problems, neighbor advances, hello in addition to dead timers, OSPF area, interface MTU, network types, neighbor states, OSPF topology table and resolve EIGRP problems, neighbor adjancies, AS number, load balancing, Split horizon, Troubleshoot and effectiveness of intelligence inter VLAN routing problems, connectivity, encapsulation, subnet, native VLAN, Port mode trunk status, Troubleshoot and resolve WAN implementation issues, Serial interfaces, Frame relay, Monitor NetFlow statistics and Troubleshoot EtherChannel problems.

Fifteen percent of the 200-101: Interconnecting Cisco Networking Devices Part 2 exam is covered by the topic called WAN technologies which may consist of different WAN Technologies, Metro Ethernet, VSAT, Cellular 3G/4G, MPLS, T1/E1, ISDN, DSL, Frame relay, Cable, VPN, a basic WAN serial connection, a PPP connection between Cisco routers, Frame Relay on Cisco routers and troubleshoot PPPoE.

200-101: Interconnecting Cisco Networking Devices Part 2 is the exam which provides more complex questions to the professionals related Cisco networking devices which is implemented by a lot of professionals in their organizations.

CertifyGuide provides maximum number of questions and answers related to 200-101 test and 200-120 exam.

Road to the achievement by using our latest and workable study material regarding 00M-638 Practice Test and 00M-639 Pdf Questions.