Best Raid Recovery Software to Overcome Raid 6 Disk Failure

Overview: Are you searching for a way or method for RAID 6 Data Recovery? Then learn some important tips from this guide.

Many users face difficulties when it becomes impossible to recover RAID 6 due to RAID Controller, Hard disk Failure, abrupt reformatting, failed or lost Array configuration, power failure, corruption, etc. Now, you will be thinking what RAID 6 stands for? What are its causes, symptoms? What are the approaches one should use to recover data? So first, take a deep breath and start reading this article as it will solve all your queries.

What is RAID 6?

The RAID 6 aka Redundant Array of Independent Disks is receptive to data loss and also works slower in comparison to other RAIDs. It is also quite expensive to maintain in comparison to other disks as it contains two extra disks for parity.

RAID 6 works on the Reed-Solomon parity mechanism for data storage and error correction. The Reed-Solomon parity codes based on P and Q parity data used in the RAID 6 array. Reed-Solomon parity is the key for the assurance of RAID 6. If one fragment of information is corrupted or damaged on either one or both disks. Then, the array controller will recalculate and then reinstall the data.

Symptoms & Reasons for Raid 6 Disk Failure:

If anyone finds one of these reasons or symptoms that are written below. Then it means that the user RAID 6 Array gets failed. These are -

• If the RAID partitions are missing.

• Suddenly the controller of your RAID falls.

• If there is a server crash.

• Or problems with power, from supply failure to abrupt alteration in the power level.

• If the disk gets damaged.

• If the user’s files impulsively disappear from the disk.

Now, the common reason for RAID 6 failure is the users have read errors on the disk drive. Or, if a mistake found on the SATA drive is URE or unrecoverable read error. This signifies that each two hundred million sectors, the disk might not read one of them. That simply indicates that once the controller sees this error, automatically RAID 6 disk recovery will stop.

Method to Recovers Data from a failed RAID by performing RAID 6 Data Recovery:

The main purpose of RAID 6 is to maintain system security and enhance the system and data availability. Although, RAID 6 needs four disks for configuration and it can recover the data even if two disks fail. But what will you do if all four disks get damaged? Then, it is high time to have a Raid Recovery Software that will help the user to recover their data within a few seconds.

Users can use Raid Recovery that helps in reinstalling the maximum conceivable data from the corrupt RAID hard disks. The software runs with all Windows-based operating systems also in the latest Win 10.

As you know about the software, let’s talk about the working of this utility.

The working of this software is very simple and easy to perform. These are -

Step 1: First, launch the RAID Recovery software on the system. Then, choose either RAID-HDD or RAID-VHD, tap on Next to continue.

Step 2: Tap on the Add VHD File button to attach the VHD files for recovery. Choose the VHD files as per the disk order and describe other options. Tap on Next to continue.

Step 3: Next, choose the scanning mode, i.e. Standard or Advance and other options too. Tap 'Next' to continue.

Step 4: Once the scanning process is done. Tap on OK.

Step 5: Choose the volume to recover the data. Also, explain custom settings for the chosen volume. Tap Next to continue.

Step 6: Now PICK the recovery mode, i.e. Standard, Advanced or Deep mode. Then, tap Next again to continue.

Step 7: The chosen volume will be scanned in just a few seconds and entire recovered files and folders will be displayed in a tree-structure manner. Choose the files in tree-structure and tap Save to store them in their native form.

Step 8: Lastly, after the saving process will be completed then, the entire recovered data will be stored at the user-desired location. Tap OK and take the exit from the software application.

Wrap up

By this blog, users will know the reasons, symptoms, and a way to perform RAID 6 Data Recovery and recovers data from a failed RAID. Users can use this utility, as it is designed with a simple interface that makes it easier to use. Plus, to operate this utility users don't require to have any technical skill.

Aakshit is a blogger, writer, freelancer, publisher for the technology niche. Works as a content writer for MailConverterTools.com.