5 A/C Repair Tips To Keep You Cool

A malfunctioning A/C during a humid climate can be frustrating. Although expensive repairs are sometimes inevitable, troubleshooting can be done without the help of a professional. In most cases, a minor change is required to restore optimum functioning as the problem is very simple.

Before instantly contacting a professional, acknowledge that there is probably a way to rectify the problem by yourself. Air conditioner repair at home is convenient and cheap.

Helpful A/C Repair Tips you can do Yourself

Instead of wasting your money and the repair company’s time, use the following tips to amend the problem with your air conditioner.

1. Change the filter

Most often, the air conditioner’s filter gets clogged and dirty if it is not changed after regular intervals. This causes numerous problems that restrict the airflow and thereby reduce the cooling efficiency of the unit. You would require a Moore HVAC service if the problem could not be fixed by yourself.

A blocked filter could also lead to icing up of your air conditioner, which could further damage it. Therefore, to avoid damage to your system and need for unnecessary professional help, filters should be checked and replaced regularly.

2. Check the breaker

If you are having trouble switching on your unit, check if the breaker has tripped. If the breaker is overloaded with many other appliances such as lights, fans, or ovens, it will trip often.

Making this quick check will eliminate the hassle of calling a professional for such a meager reason. Keep an eye on your breaker if your air conditioner is refusing to switch on and try to switch off the other appliances attached to it.

3. Examine the thermostat

If your system is battery operated, it may need new batteries to function properly. This small change could save you significant distress and prevent spending money for futile reasons. You may require a small adjustment to restore the function of Moore air conditioning.

Be sure that your thermostat is set to a temperature below room temperature to allow cooling. There may also be an inadvertent change of settings that could alter the mode of the air conditioner. Ensure that it is not set to fan blow or any other setting to promote cooling.

4. Check your ducts

If you are having trouble with your unit, your ducts could be the problem. They may be blocked due to excessive dirt, which could affect the efficiency of your air conditioner. Although seemingly uncomfortable, checking your ducts is worth it to fix your cooling problem. However, Moore heating and air services can always be of assistance.

Alternatively, a register may accidentally close partly or completely, which can also restrict or block airflow. To ascertain these conditions, your air ducts should be examined. This simple surveillance can easily save you the time and money that a service professional would cost.

5. Clean your unit

In some cases, your air conditioner may malfunction due to dirt particles. The easy solution to this is cleaning every part of the unit with the necessary precautions taken into consideration. The fan blades of the external unit can be cleaned to remove any debris.

While cleaning, ensure that there is no power supply available to the system. The condenser fans can also be cleaned with care. Ensure that you are careful while cleaning the air conditioner as the fins are fragile and can break easily.

Endnotes

If you are experiencing trouble with your cooling system, the problem might be easier to fix than you think. Take the given tips into consideration before calling a professional. These steps could easily avoid unnecessary expenditure on repairing your air conditioner. However, take the necessary precautions before exploring your handyman skills, or you could get injured.

Blogger - Influencer - Reader