How Can You Repair Your Own Slate Roof?

Slate roof repair should be conducted by an expert, homeowners do this bit of housework on their own by following the steps above. Slate roofs generally lost you for many years and provide good service. However, having said that, sometimes your slate roof might develop a problem and you might have to look for slate roof repair in your area.One of the most common problems is a leak. When this happens, you need slate roofing Melbourne experts that can replace the slate that may be leading to the problems.But you don't necessarily always have to call a roofer for the job.This is something you can do on your own as well, of course, given if you have the potential to stand heights.

Following is the list of steps that you need to follow for slate roof repair. If you're not sure of what you're doing, it is recommended to consult with experts for slate roofing in Melbourne who can solve your problems. Because late roofs are so fragile and it is very easy to break the tiles, unless you have experience and confidence for repairing the roof yourself, it is not recommended to try this.

Remove the old slate

The very first thing that you need to do is to climb on the roof.The next thing you need to do is find the slate that is causing the problem or the leaks.If you know them estimated location of the leak within your home, you will be able to find out where the leak might be located externally on the roof as well.

Then you find out where the problem is located and which tiles or slates are responsible for it, you will need to remove the tiles. In order to do this, you will require slate ripper. This is why, before you climb on the roof, you need to make sure that you are already carrying all the tools that you will need. The slate ripper can be used for ripping off the nails. Keep the tile or the slate hooked to the slate roof. By removing these nails, it should be able to get rid of the slates as well.

If you have good wire cutters, you may also be able to cut off the head of the nails that are attaching the slate to the slate roof for install this helps in most cases, but if you find any problems doing this, you should hold the report lower and away from the roof and then he did with the hammer.This will pull out the slate or the tile.

Temporary repair

If there are any issues with removing the slate, and you feel like the weather is getting worse, you will need to make arrangements for a temporary repair. For this, you can use roof tar.Apply that are all over the holes or cracks in the roof slate. Having said that, it should be noted that this is only a temporary solution that will hold on for only a short period of time.You should climb that on the roof and complete the roofing process on the leakage area as soon as it is possible for you to do this safely.

New tile size

You will need to find out the correct size and color of the tiles you will be replacing all instead of the broken tiles. Basketball, you should measure the space that is left. You will also need to fill the weight, and remember that the replacement tiles should be at least twice as low open as the opening, with an additional 3 inches.This is required because it allows a good overlap between the replacement tile and the tile below the replacement tile.

Replacing the tile

The next thing that you will need to take care of is sliding the new and replace tile in the right place.You should also make sure that the tile is set in such a way that it is completely secure and in the precise position where it should be.If there is a chamfer on one side of the slate you will need to make sure that this particular side is on the top. This is cause you need to slide it under the slate above it. After you have done this, you will need to slide you piece of bib flashing under the replacement slate.This is done to ensure that part of the replacement tile covers the head of the nail. As a result of doing this, there will be no leakage through the hole.

Tingle

The next thing worth keeping in mind is that when you are replacing a slate, you can also help fix it and make sure it is remains in its place with the help of it angle. Pettingill is a small piece of copper or lead. Generally speaking, it is 1 inches in width and it is long enough that it will extend one inch over the replacement slate length. In order to place a tingle, you should make a hole in one end of the tingle. Now take a short nail and fix it to the batten that has been placed under the tile which is next to the replacement tile on the spot where leakage has developed. Now place the replacement tile in its correct place and align it correctly. The next thing you have to do is bend the tingle so that the bottom end of it hooks under the slate. This will keep the replacement slate in its place.

And that's how you complete the replacement of a tile for slate roof repair on your own. It should be noted that you should only do this sort of thing if you have experience with climbing on slate roof.It is very easy to damage slate roof tiles if you don't know what you're doing, you may end up causing more damage than there was initially.

Top tier slate roof is an excellent roofing contractor in Australia that will help you with all your slade rose needs, from repair, to repointing, to installation of a skylight.

Top Tier Slate Roofing will work with you to create a unique and customised slate roof of exceptional quality. With 14 years of experiance at Slate roof tile Melbourne, we are Using traditional and modern techniques.