AirDrive Serial Logger Access Guide :)

AirDrive Serial Logger - RS232 Logger and Data Recorder with WiFi and 16GB Flash

The AirDrive Serial Logger is a compact serial and RS-232 logging device, only 2.4" (61 mm) in length. It can be accessed with any Wi-Fi device such as a computer, laptop, tablet, or smartphone.

Features

• Logs asynchronous serial transmission (RS-232 compatible)
• Baud rates up to 115200 bps
• Logs 2 streams simultaneously (RX and TX)
• Small and compact, only 2.4" (61 mm) long
• 16 gigabytes of built-in memory
• Industrial grade flash memory
• Works as a Wi-Fi hotspot
• Connect from any computer, smartphone, or tablet
• Access data from web browser, no software or app necessary
• Retrieve data remotely without touching the device
• Simple and clear WWW interface
• Supports WEP, WPA, and WPA-2 network security
• DB-9 male and female connectors on both ends
• USB-B side socket for power (5V DC)
• USB cable included

Data logging made simple

The AirDrive Serial Logger is a compact asynchronous serial logger, capable of recording RS-232 data streams from devices like printers, GPS receivers, terminals, keyboards, mice, barcode scanners etc. Connect the device either to a single serial source, or in-line on a serial bus. Connect 5V DC power using the side USB-B connector. The AirDrive Serial Logger will immediately start logging all data available on the bus, both upstream and downstream (RX and TX). No software or drivers are required.

Easy access

All AirDrive devices act as Wi-Fi hotspots. You can connect to them with any Wi-Fi device, such as a smartphone, tablet, or laptop without even touching the device! The AirDrive device will then present a webpage with the data log and configuration options. No additional software or drivers necessary.

Quick configuration

Configuring the AirDrive Serial Hardware keylogger is quick and simple. The only parameters that need to be set are the serial bus characteristics, such as the baudrate, bit count, parity and stop bits. This can be done in less than a minute through the configuration webpage.

The Pro version advantage

The Pro version adds a powerful set of features centered around the capability to act both as a Wi-Fi hotspot, and a Wi-Fi device with Internet connectivity. This unleashes a broad set of options, such as email reporting, time-stamping, and live data streaming.

The Max version advantage

The Max version has all the capabilities of the Pro version, enhanced with 16GB internal memory available as a USB Hi-speed flash drive (480 Mbps). For a serial device, this essentially means unlimited data storage, accessible both remotely and locally over USB.

AirDrive Serial Logger Pro - RS232 Logger and Data Recorder with WiFi, 16GB Flash, Email and Live Data Transfer

The AirDrive Serial Logger Pro is an enhanced version of the AirDrive Serial Logger, with additional connectivity options. It works both as a Wi-Fi hotspot, and as a Wi-Fi device, enabling features such as Email reports and time-stamping. Ultra-small, only 2.4" (61 mm) in length, and easy to access from any Wi-Fi device such as a computer, laptop, tablet, or smartphone

Features

• Logs asynchronous serial transmission (RS-232 compatible)
• Baud rates up to 115200 bps
• Logs 2 streams simultaneously (RX and TX)
• Small and compact, only 2.4" (61 mm) long
• 16 gigabytes of built-in memory
• Industrial grade flash memory
• Works as a Wi-Fi hotspot, or as a Wi-Fi device
• Sends Email reports with recorded data
• Supports time-stamping
• Supports live data streaming over network
• Connect from any computer, smartphone, or tablet
• Access data from web browser, no software or app necessary
• Retrieve data remotely without touching the device
• Simple and clear WWW interface
• Supports WEP, WPA, and WPA-2 network security
• DB-9 male and female connectors on both ends
• USB-B side socket for power (5V DC)
• USB cable included

Data logging made simple

The AirDrive Serial Logger is a compact asynchronous serial logger, capable of recording RS-232 data streams from devices like printers, GPS receivers, terminals, keyboards, mice, barcode scanners etc. Connect the device either to a single serial source, or in-line on a serial bus. Connect 5V DC power using the side USB-B connector. The AirDrive Serial Logger will immediately start logging all data available on the bus, both upstream and downstream (RX and TX). No software or drivers are required.

Easy access

All AirDrive devices act as Wi-Fi hotspots. You can connect to them with any Wi-Fi device, such as a smartphone, tablet, or laptop without even touching the device! The AirDrive device will then present a webpage with the data log and configuration options. No additional software or drivers necessary.

Quick configuration

Configuring the AirDrive Serial Logger is quick and simple. The only parameters that need to be set are the serial bus characteristics, such as the baudrate, bit count, parity and stop bits. This can be done in less than a minute through the configuration webpage.

The Pro version advantage

The Pro version adds a powerful set of features centered around the capability to act both as a Wi-Fi hotspot, and a Wi-Fi device with Internet connectivity. This unleashes a broad set of options, such as email reporting, time-stamping, and live data streaming.

The Max version advantage

The Max version has all the capabilities of the Pro version, enhanced with 16GB internal memory available as a USB Hi-speed flash drive (480 Mbps). For a serial device, this essentially means unlimited data storage, accessible both remotely and locally over USB.

For more Information please visit: https://www.keelog.com/

I am Jack, Working as a Marketing Manager at keelog which gives Usb keylogger and hardware keylogger to monitor your employees, Children or any other person.