How to Seal and Finish Floor in Bangalore?

The finishing process is vital to create a solid layer of protection and give the surface its shine. Floor sealers are applied before the floor finish. The sealer contains smaller polymers and penetrates deeply to fill in small cracks and pores within the floor. These sealers are semi-permanent and have high chemical resistance. In contrast, the finish is applied on top. These layers will give the floor its shine and protection and are meant to be slowly worn away with normal use. With proper floor maintenance, only the floor finish is meant to be stripped away and reapplied to leave the sealer unaffected.

Here we will discuss the needs and steps use in floor sealing in Bangalore.

Needs and Safety Guidelines

It will need a floor finish applicator(such as a hard string mop or a flat mop), wet floor signs, sealer, and floor finish.

Although modern cleaning chemicals are safer than in the past, always read and follow WHMIS and safety guidelines and wear the appropriate personal protective equipment as called for on the product label.

Step 1: Apply Floor Sealer

There are various ways that the sealer and finish can be applied to the floor. A string mop or a flat mop can be both used. If a bucket is used, make sure to line the bucket with the garbage bag to prevent residue from mixing into the finish. Regardless of which mop is used, first, soak the mop in water and then wring it out. Each fiber in the mop can only hold a certain amount of moisture. Presoaking the mop will ensure that less of the floor sealer or finish will be absorbed inside the mop. Allowing more of the solution to be applied to the floor. It will help coat the floor evenly and make it easier to clean up the mop afterward.

Step 2: Apply Additional Costs of Floor Sealer

After the first coat is dry, choose a different starting point to apply the second coat. Apply as many coats of sealer as needed to provide a solid layer of protection for the floor. It is indicated by an even semi-gloss appearance across the entire area and usually takes 2 to 3 coats.

Step 3: Apply Floor Finish

The same mop can be used to apply the floor finish. Any remaining sealer will quickly be dissipated as the floor finish is applied. Apply the finish with the same technique as the sealer. You will want more finish in the middle where people walk. To maintain a uniform appearance, apply your first and last coats to the edge and the other coats in the traffic areas.

Conclusion

When we talk about floor sealing Bangalore, it is not easy to do by own. It needs chemicals and some tough processes. Those tasks are tough to do by own. Here is the work start of floor service companies. Excellent Floor Care is the floor service company in Bangalore that provides the best floor care services at affordable prices.

Excellent Floor Care offers Marble & Granite Floor Restoration Polishing Cleaning Sealing Repair Maintenance in Bangalore