How to Stop the PlayStation 4 From Starting Up in Safe Mode?

There are many causes why your PS4 is stuck in the safe mode. Some reasons may include loose cables or outdated consoles etc. Several users are reporting this issue on the PS4 forum. So, if you are one of those who deal with the same problem, you can follow this article. Here is the complete procedure mentioned below.

Open Safe Mode on PS4

The users to open safe mode through the under-written directions. If you have already tried this resolution, then continue further to the next solution.

1. Firstly, switch on the PS4.
2. Then long-press the power key.
3. You should link the controller of DualShock 4 using the USB cord.
4. Now, hold the button of PS on the controller’s middle.

Use Menu Options to Get Out of Safe Mode on PS4

Users keen to stop the PlayStation 4 from starting up on safe mode via menu options to get out of the safe way can determine to pursue the directions given below.

1. You should connect the controller to the USB port of PlayStation.
2. Then choose the option of the first menu.
3. You have to wait to restart the PlayStation 4.
4. Finally, in case the PlayStation gets the return to the Safe Mode, once pursuing these instructions.

Detach the Console on PS4

The users intended to detach the console can go through the under-written directions. If you have already tried this resolution, then continue further to the next solution.

1. Firstly, turn off the PlayStation using the power key.
2. After that, detach the console’s power cable.
3. You should let it disconnect for at least 20 minutes.
4. Then connect the cord again and switch on the console.
5. Now, when you see it still loads in the safe mode, try the "Restart PS4" menu option.

Check the Power Cable on PS4

The users keen to stop the PlayStation 4 from starting up on safe mode via check the power cable can determine to pursue the directions given below.

1. Switch off the PlayStation 4 by pressing the power key.
2. After that, go to the backside of the PlayStation and detach the power cable.
3. Then reach the wall outlet and disconnect the power cord.
4. You should let the PS4 detach for a minimum of 20 minutes.
5. After that, connect the power cable again.
6. Now, in case you still boot up into the Safe Mode, reboot these instructions.

Rebuild the Database on PS4

The users intended to rebuild the database can go through the under-written directions. If you have already tried this resolution, then continue further to the next solution.

1. Attach the PS4 to the connection of the internet through LAN or Wi-Fi.
2. After that, click on the Rebuild Database option within the menu.
3. Then leave the console alone, and it takes some time.
4. Now, once I rebuild the database, reboot the PS4.

Check the HDMI Cords on PS4

The users keen to stop the PlayStation 4 from starting up on safe mode by checking the HDMI cable can determine to pursue the directions given below.

1. Detach the HDMI cord from both sides.
2. After that, check the switch on the end sides of the cords.
3. Later, using the HDMI cord that was connected to the TV and PS4.

Apart from these, you can reinstall the system software to fix the issue.

Read Official Blog Post - https://25digit.co.uk/how-to-stop-the-playstation-4-from-starting-up-in-safe-mode

Rosy Martin is a creative person who has been writing blogs and articles about cybersecurity. She writes about the latest updates regarding office setup and how it can improve the work experience of users. She articles have been published in man