Top 5 Features to Look for While Buying Eductor Nozzle

An Eductor nozzle plays a great role in various types of industries. Be it the petrochemical industry or some other industry, these tiny, mechanical systems lend a great help when it comes to mixing, pumping or heating various sorts of things. Regardless of the state of the thing (either, solid, liquid or gaseous form), the mixing, heating or pumping process becomes much easier when done with the help of an eductor nozzle. Basically, these eductor nozzles are used to mix and pump various liquids in the industrial tanks. However, they are also used for cleaning slush and muck and for draining the liquid too. Sometimes, these nozzles are even used for heating up the liquids in-line or sometimes, in tanks, too.

If you are planning to buy the eductor nozzles in near future, we have shared the top 5 attributes that you should always look for and verify before making the final deals on the same! Check out the same below.

Make sure that your chosen eductor nozzle is capable of effective mixing

The first thing that you need to check in the eductor nozzles is its capability of mixing. As mixing is the foremost function of this nozzle, one should check that mixing is done properly and effectively. Check and verify that the nozzle contains a proper design that transforms the high flowing velocity of fluids in a low-pressure form inserting the liquid for recirculation in the nozzle. Such designs in nozzles ensure that the fluids or liquids will get mixed in a proper way in the tanks.

Check out the cost-effective operational mode in nozzles

Ensure that the amount of liquid that comes out of the eductor nozzle is more than (approximately 3 to 5 times) the amount of liquid that has been pumped. Nozzles that promise smaller capacity of pumping and greater capacity of fluid exits ensure proper and effective mixing in both closed as well as open tanks.

Choose nozzles that require minimum maintenance

You definitely do not want to spend hours checking and maintaining the nozzles to make certain that they are in proper condition and working effectively. Instead, you should buy nozzles that require minimum maintenance. Thus, discuss this point in detail while buying the nozzles. Also, the chosen nozzles should have the feature of clog resistance as nozzles that have superb clog resistance ability require minimum upkeep while promising increased and uninterrupted function.

Nozzles should ensure instant and non-stop mixing

It is always better to choose nozzles that permit fresh supplies in the nozzle inlet instead of reprocessing the feeds from the tank. Such designs offer instant and proper mixing of fresh feeds with the contents or fillings of the tank. Also, this should be followed by non-stop circulation and mixing.

Nozzles that can withstand high temperatures

It is wise to buy eductor nozzle that can withstand high temperatures, say, up to 95° C. Thus, go for glass reinforced polypropylene eductor nozzles as they help you mix fluids and liquids of high temperatures without any chances for thermal breakdown.

Keeping the above points in mind will help you buy the best quality eductor nozzle.