Vibration Monitoring and Analysis – Pump Vibration Counts!

When talking about the many advantages of vibration monitoring and analysis, it is important not to overlook pump vibration, too.

Vibration analysis is the process of looking for irregularities or patterns of error in how a machine vibrates. Essentially the vibration of a machine can be read as a frequency (sound, for example). When that "sound" changes – the machine is bound to break!

Supervisors can use this technology to determine if machines are likely to break soon. In some facilities, this saves lives. Some machines may break causing meltdowns or explosions – if we can predict that early enough, we can shut it down before that occurs.

When people search for pump vibration, they need to keep this information handy.

Engine Vibration Monitoring

It’s obvious that engines vibrate – anybody who has been in an airplane, or a car, knows that much. These engineers work hard to create devices that shut down when they’ll be dangerous due to excessive vibration. Sensors are responsible for the kill switch.

In factories, sensors can report the occurrences to the supervisor who will take the appropriate action.

Bearing Condition Monitoring

Bearing problems can result in vibration patterns that make no sense. The machine’s sensors will report this straightaway. It keeps track of any problems, any funky actions, or noises, to make sure the supervisors know about the concern right away.

Gearbox Vibration Monitoring

One more application that make sense in this conversation is none other than that of gearbox vibration monitoring – gearboxes control a lot but rubbing happens often. Too much rubbing can lead to a full-on breakdown.

By going with monitoring for a gearbox, vibration can be tracked so that potential problems are identified because they cause a major problem on the floor.

How is Vibration Analysis Conducted?

Every group has somebody who asks how vibration analysis is conducted – it’s a fair question, however. Various complex procedures take place. In summary, though, it’s about reading the waves of the vibrations as well as the recurrence range.

Build up a Baseline

To build a baseline, you have to utilize all of the vibration information you have in front of you. If you don’t have enough data to formulate some valuable insights, then you’re not in a great situation. Start with the benchmark information and go from there.

Hot tip: don’t forget to invest in sensor cables when installing sensors. That goes double when talking about pump vibration.

The article presents a variety of informational factoids on motor vibration in engines.