6 Steps to change tyres on a truck

Purchasing and maintaining a truck is a difficult task. To keep all its equipment running, it must be looked after regularly. After all, the last thing you need before a drive is to discover damaged truck parts. Service should be performed on a frequent basis to prevent this from happening. It is possible to extend the truck's longevity and performance by properly maintaining it.

On the road, there are many obstacles to overcome: traffic, accidents, and automobile breakdowns. Among all of the problems, the most common issue encountered while driving is a flat tyre. It is frequently caused by sharp things such as glass, nails, or wire. Driving cautiously is the only way to avoid a puncture.

Certain tools and instruments should always be kept in the truck by a truck driver in case of an emergency. A jack, wrench, a spare inflated tyre, and the owner's manual should all be kept at hand. However, if a flat tyre occurs while driving, knowing how to replace the tyre is essential. In the event of an emergency, follow the steps below.

How to Change a Tire on a Truck?

1. Locating a secure site

Before stopping the vehicle, the first step is to select a safe location. It is preferable to choose a location with a levelled road on one side. Turn on the danger lights and apply the parking brakes once the truck is parked. This serves as a warning to other cars to stay away from the land, lowering the risk of trucks losing their grip.

1. Lifting the truck

Now, let's go on to the tyre replacement procedure. Jack should be positioned beneath the truck where the tyre must be replaced. Whether it is a heavy duty truck or a light truck, the jack will need some support. Try to find a little piece of wood that can assist in the lifting up process. Place the jack in such a way that it lifts the truck to the point where the tyre is 6 inches off the ground.

1. Removing off the nuts and bolts

Nuts and bolts must be removed with the use of a wrench. Turn the nuts in an anticlockwise orientation to break the resistance. Ensure to only remove ¼ of the nut in the beginning. Hold the wheel with both hands and carefully take it out once it feels loose.

1. Cleaning

Cleaning the rim and deflating the tyre may appear to be an inconvenience, but it is crucial. Dust may have accumulated on the rims; wipe the area with a damp cloth. Before putting the old tyre in the truck, deflate it after cleaning it.

1. Use a tyre changer

The tyre changer is used for the purpose of fitting and removing tyres in the truck easily. Applying a lubricant is recommended for both the rim and the tyre. Now place the tyre on the rim and take help from the mounting hook to pull the beads. Do not stretch the tyre too much, adjust it properly to fit within the rim.

1. Fitting the tyre

After the tyre is adjusted, fit in the nuts and bolts. Once they are put, adjust them and tighten them using the wrench for better grip. Once the tyre is fit in, check the air pressure. The inflation should be according to the prescribed level. Once this has been done, your truck is ready to go.

Conclusion

Puncture is a common hazard for drivers. All you can do is prepare for the worst-case scenario. There are upskilling programmes available, such as the Pro Pilot programme, that teach fundamental and advanced driving skills. These classes also educate you on how to deal with roadside truck emergencies.

Rea Setia is an passionate writer. She loves to share business tips and her experience about industry.