What Are The Curing Concrete Challenges In Hot Summer Days?

If you are thinking about building any residential or commercial project in the upcoming summer seasons. You must know that curing concrete in June and July will be different than in other seasons.

And there are critical challenges that concrete contractors face on summer days. And in this hot season, they do work with specific procedures and techniques.

In this article, we will share what concrete contractors in Calgary challenge on hot days? And what are the effects of heat on the concrete? Also, why is curing concrete essential?

So without further delay, let us begin with our talk.

How Does Hot Climate Impact Concrete Curing?

Hot and cold weather can affect all materials and their different states. Also, shotcrete material gets affected under increased heat and cold temperatures.

However, hot conditions increase the evaporation rate of the surface moisture on freshly sprayed concrete. Heat conditions also accelerate the setting time. And in a concrete structure building, you need the surface water from a poured slab; because surface water is needed to keep the concrete hydrated and prevent drying out.

Moreover, if you are noticing a high rate of evaporation while the building process is going on. You must be aware and make sure the concrete services you requested are aware of that too.

Because this high rate of evaporation will lead to surface cracking or shrinkage of plastic. And to help the concrete to stay in good shape, it must be refrained from using water. This will help rehydrate the surface and it's better to use evaporation retarders and finishing aids like Solomon Brickform’s Lythic Day 1.

Below, You Will Find Potential Arising Issues In Pouring Concrete In Summers:

• Less time in the settling time will make concrete very difficult to be controlled– also it means less time to place, consolidate and finish the concrete applying process. Therefore, the working crew has to work quickly.

• There will be an acceleration in recession failure – which can lead to a loss in entrained air.

• Also, plastic shrinkage and cracking will occur – as moisture evaporates too fast. This means the surface will start cracking, or the plastic will get affected by the cement.

• Lastly, the construction might face a reduction in maximum strength – because if the concrete cures too quickly in the heat, its strength can suffer. Concrete needs to be cured at a standard 21-220C temperature to develop a remarkable strength.

What Is The Purpose Behind Curing Concrete?

As a common residential or business owner, you might not understand why cutting the shotcrete is a requirement. Thus, in this section, we will explain the purpose of curing concrete. And the purpose of curing concrete is to keep up with the satisfactory moisture content. Plus, with the temperature so concrete slab can attain its optimal stability as it sets.

Curring Step Is Required When Building Your Commercial Or Residential Construction, Here Is Why?

• To specify the long-term strength and durability.

• And concrete sets with a process called hydration. It absorbs water that connects the concrete mix. Then this process will start forming crystals around particles in the concrete, which will strengthen it.

• Also, concrete will take up to 28 days to reach its preferred strength and quality.

Moreover, the crystallization process will speed up in hot temperatures; and will require time to strengthen the structure. So you will need a good amount of time by watering the structure's surface.

In addition, for your information only, cold temperatures are considered best for concrete.

Because the hydration process slows down and allows more time for the crystal structures to strengthen. But when the temperature is too hot, the crystallization process speeds up, leaving less time for the crystal structures and concrete to strengthen.

Not like hot weather, the water will evaporate from the concrete surface quickly. And we as SprayForce Concrete experts, don't work like this.

Because we care about our reputation that has been built for a long period. And we care about customers' requirements and timelines. We use our long time knowledge in constructing in summers. To prevent drying out and shrinking in concrete. Which can lead to weaker concrete at the top of the slab.

The Bottom Line,

It is better to use shortcuts than use long-time ways. And when it comes to concrete, you need to get an expert to apply the sprayed concrete.

They can stop high-risk practices like slick trowel finishing by covering a burlap drag or broom finish. And they will make sure the concrete curing happens when surfaces are hard enough to withstand marring.

Also, sealing is done with a good quality sealer for around 30 days maximum. This process is going to ensure the concrete is placed and cured correctly.

So make sure you get the best of the best concrete companies in Calgary-AB.

Some ways assist you in controlling the oil filtration system and industrial lubricate from contamination and degradation.