Orange Flashing Light on Canon Printer (Step-by-Step Guide)

If you are looking at the orange flashing light of the Canon printer, don’t worry, you’re not alone. This is a frustratingly common issue when you have to get something printed right away. Fortunately, this guide will make it easy to diagnose the issue – and fix it, too.

What Does the Orange Flashing Light on a Canon Printer Mean?

The orange light blinking on a Canon printer indicates several error issues. Depending on the number and pattern of flashes, the light might indicate such issues as a paper jam, low ink levels, a cartridge error, or another hardware problem. orange flashing light on canon printer

Canon Printer Flashing Codes and Their Meaning

Understanding the flashing pattern is crucial. Here’s a quick breakdown of what different flashes mean:

• Flash: Paper Feed Error
• Flashes: Cartridge Not Installed Properly
• Flashes: Paper Jam
• Flashes: Ink Cartridge Error
• Flashes: Print Head Not Installed
• Flashes: Ink Cartridge Not Recognized
• Flashes: Ink Absorber Almost Full
• Flashes: Other Hardware Errors

Step-by-Step Guide to Fix the Orange Flashing Light on Canon Printer

Step-by-Step Guide to Fix the Orange Flashing Light on Canon Printer

Step 1: Power Cycle the Printer

Instructions

• Turn off your Canon printer.
• Wait for 2–3 minutes.
• Now, plug it back in and turn it on.

Step 2: Check for Paper Jams

Check the paper tray, rear tray, and the output slot.

Instructions:

• Clear any jammed or folded paper.
• Wipe the paper path with a soft, dry cloth.
• Make sure there are no pieces of paper stuck in there.

Step 3: Install the Ink Cartridges Again

Cartridges are not correctly seated.

Instructions:

• Cartridge access door: Open the cartridge access door.
• Take out and reinstall the ink cartridges properly.
• Make sure cartridges click into place.

Step 4 Use the Original Canon Cartridges

The orange light blinking on Canon printer can be found when you use the third party ink or the refilled ink.

• Exclusive use with Genuine Canon Ink and Canon Ink Cartridges.
• Ensure you’re using compatible third-party ink.
• Step 5: Reset the Ink Counter (For Ink Absorber Warning)

  If your prints flashes 8 times, there could be something called the ink absorber is full or almost full.

  • Press and hold the Stop/Reset button for 5 seconds.
  • Release and wait for the led to stop flashing.
  • Repeat if necessary.

  Note: It is only a temporary solution. The ink absorber will eventually get full, and a technician may have to replace it.

  Step 6: Update Printer Firmware and Drivers

  Some of the time, a firmware update can address those repeated errors.

  Conclusion

  The orange flashing light on a Canon printer can be frustrating, but knowing the flash code can help you fix most issues. From paper jams,printer reset and printer update it covers all logical solutions.

  If that doesn’t solve the issue, don’t hesitate to call Canon’s customer support or take it to a service center.