Abbe Tan
Member since: Jul 03, 2019
Published articles: 6
Topcis: GPON configure,This document describes the operation of GPON service board (such as GPBD/GPFD and so on) commonly used command on OLT.Due to the different association of Huawei...
After the inband management channel between the OLT and the ONU is configured and available, you can log in to the ONU from the OLT to configure the ONU.Data planItemDataRemarksManagement VLAN and...
Issue DescriptionA TN52TOG and TN54NQ2 placed in slot16 and slot5 of Huawei OSN8800 (V100R002C02SPC800), the TN52TOG report ODU0_PM_SSF alarm after configuring ODU0 between TN52TOG and TN54NQ2.The...
Issue DescriptionIn a network we have iManager U2000 NMS & the MW NEs are RTN 900 & some of the UBR links which need to visible on the NMS. Now when we are going to visible the RTN 910 which are...
Issue DescriptionQ:-What bands are using currently for Huawei DWDM equipment networking?Alarm InformationNullHandling ProcessTypically, the following bands have been defined in Optical...
Issue Description In an OSN project, the Huawei OptiX OSN 3500 and Huawei OptiX OSN 1500 form an SNCP ring. Three optical ports on the N1SLQ1 of the OptiX OSN 3500 are not used. Hence, the R_LOS alarm...