The Manufacturing Process Of Fused Cast AZS Block

Fused cast AZS block is the most widely used refractories in the glass industry. Its quality and performance is mainly up to its manufacturing process.

The manufacturing process of fused cast AZS including formulating, melting, casting, annealing, machining, inspection, physical and chemical analysis, pre-assembling and packing. FormulatingWeight the raw materials and mix them together based on the formulation. Melting Pour the raw materials in the automatic controlled electric arc furnace. When melting the glass in the single-phase or three-phase electric arc furnace, the temperature should be appropriate. It the temperature is low, it is difficult to obtain highly homogeneous glass melt, which will make the cast products porous and causes large shrinkage cavities and cracks. The key of the melting process is to keep the melting temperature steady to obtain melt with uniform chemical composition, low carbon content and good casting performance. CastingPour the melt into the special designed molds to form fused cast AZS block with dense structure and good performance. Improving the temperature of melt can make the shrinkage cavities concentrated and the structure denser. But if the temperature is too high, through the density increases, the possibility to form cracks and large shrinkage cavities increases too. Annealing Cool the cast products slowly to make the crystals grow and form the best structure. Usually put the molds in insulation boxes filled with diatomite when annealing. The initial temperature of annealing and the insulation effect have great impact on the annealing performance. MachiningUse precise processing equipment to process the block to the precise dimension. Machining can also improve the quality and service life. InspectionAccording the quality standard and contract requirement, inspect each block strictly. Physical and chemical analysisAccording the quality standard and contract requirement, analyze the physical and chemical parameters of fused cast AZS. Pre-assemblingPre-assemble the block used in the demanding areas according to the drawing of furnaces. PackingPack the block according to its properties and the general packing requirement of refractories. Sunrise is a refractory material supplier from China. The main products of Sunrise include fused cast AZS block, fused cast alumina block, mullite brick, zircon brick, alumina bubble brick, sillimanite brick, corundum brick, low porosity fireclay brick, high alumina brick, all kinds of glass furnace ramming masses, etc..

Article Source: http://www.fusedazs.com/news/87.html

Changshu Pingfang wheelchair CO.,LTD has focused on top quality manual wheelchair and electric wheelchair for over 10 years in China. We started as a small company for help disabled, but now have become one of the leading wheelchair industry manufac