Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

Home wifi installation service

Author: Bill Post
by Bill Post
Posted: Apr 20, 2019
wifi setup

If you are having WiFi range issues, WiFi dropouts, poor WiFi performance or need WiFi coverage added to your network, Server Guru on the north side of Brisbane can help with WiFi network technical support, Extending your WiFi coverage & WiFi setup.

We provide Home WiFi Setup, Business WiFi Setup, WiFi Installation Service, Home WiFi Network, WiFi network setup, Extend WiFi Range, WiFi consulting, WiFi maintenance & WiFi support services to Brisbane businesses and home users.

Our WiFi technicians provide professional wireless network planning, design and installations. home wifi installation service. Our goal is to get your wireless network functioning at 100% efficiency. We help you get a better WiFi connection.

If you are low on budget here are some free tips to improve your wifi coverage:

Keep your Wifi router as high and open as possible

For best signal point the antennas straight up

Keep the wifi router away from other interfering wifi devices like DECT phones, wireless intercoms, baby monitors, microwave oven etc.

Move the wifi router away from solid obstacles.

Get an updated router

If you’re in the market for a new router and you want improved Wi-Fi speeds and reach across your home or office, aim for at least an 802.11 N or AC router with dual or triple band capabilities.

AC routers have a maximum spectral bandwidth of around 8 x 160 MHz, compared to the 4 x 40 MHz standard of N routers. In other words, the increased bandwidth allows more data to be transmitted without slowing down.

Additionally, by having multi-bands, you could keep older 2.4GHz devices on their own bands while keeping newer devices that support the latest Wi-Fi standards on the higher bands. This is like having multiple routers in one.

Newer AC routers also have advanced features not found in older routers. Look for specifications like beamforming, Multiple-In-Multiple-Out (MIMO), multiple USB 3.0 connectors and Gigabit Ethernet ports.

Choose the right band

Wi-Fi bands are not created equal. If you have a newer router, check to see if it supports the 5GHz band. Newer N or AC routers typically support this band. Unlike B/G routers that only transmit on the crowded 2.4GHz spectrum, N and AC routers could transmit on 5GHz as well.

Newer routers usually have dual-band capability. By enabling dual bands, you could keep older devices that only support the slower G specification on the 2.4GHz band and newer devices on the beefier and speedier 5GHz band. This is essentially like having two routers in one.

Change location

Another important factor that affects your Wi-Fi network’s connectivity is its physical location. Try placing your router as close to the center of your home as possible. It’s also a good idea to keep it elevated and free from any physical obstructions like furniture and appliances.

You may also avoid reflective surfaces like glass, mirrors, and metal because Wi-Fi signals tend to bounce off these types of materials. Walls, especially those made of concrete, can also severely degrade your Wi-Fi signal.

You may even adjust your router’s antennas. Your router’s antenna is omnidirectional, so the signal goes every direction equally. If you put your router along an outside wall, you’re sending half your signal outside.

If your house is too big for a single router, you may need a boost. For distance issues

About the Author

Bill writes is a student at UCLA, studying towards Media and arts. Bill is an avid listener of birds and enjoys watching planes go by.

Rate this Article
Leave a Comment
Author Thumbnail
Please or Join to add a comment.
Author: Bill Post

Bill Post


Member since: Feb 12, 2019
Published articles: 9

Related Articles