How To Fix Connect brother Printer to Wifi?

Most of the time, because of the many primary reasons, people encounter the wifi system failed on their connect brother printer to wifi.

• Incorrect details regarding wifi.

• Issues surrounding access point or router.

• The strength of the signal is low.

• Issues related to the Printer.

But the good part is that you don't need a contractor to fix this issue because you can set it up on your own. So start with this guide and repair the brother printer will not be linked to wifi.

Guide To Fix Connect brother Printer to Wifi-

Step 1 – Check the signal strength-

If your how to connect brother printer to wifi doesn't link to the wifi network, the signal strength should be tested first.

If the wifi signals appear weak on the printer, you should be available in the excellent or good signal zone. You should have your printer installed next to the wifi router. Now try connecting it over the wireless network.

Step 2- Power cycle the printer and computer-

You should have your device's power cycle once after testing the efficiency of the signal.

Switch off your wifi access point, and wait a minute to turn it on now.

Let's disconnect the power wire from your printer, wait and turn it on for 30 seconds.

After restarting your printer you can try to connect your printer to the wireless network once you see the ready screen.

Step 3-Check wifi credential details-

If during the how to connect brother hl l2340dw printer to wifi you get the wrong username or password error.

Wifi credentials including password, form of encryption, etc. should be tested. People get this kind of error most of the time, because they don't enter the valid password. So be sure that you don't become one of these.

If you have any questions about your password, you should check the password once.

Step 4- Change the wifi name, password & encryption type

There may be a problem with the current wifi profile sometimes; that is why your brother printer might not be connected to the wireless network.

So, you can reset your router's network name, password, and type of encryption.

• You can use this guide to reset the wifi profile on your router.

• Get into the Admin panel of the router.

• Tap the Setup for Wireless.

• Clear the current name of the network and type in your new name.

• Choose the type of wifi encryption as 64 bit WEP.

• Erase the old password, and create a new password for hexadecimal.

• Now press the Save Settings button or make adjustments (whatever you see).

Type in anything that you want. Then click Quill It on the right to paraphrase your input.

Step 5 -factory reset the network settings –

If you've tried the above instructions yet your brother printer not connecting to wifi will not connect to the wifi network.

Network settings should be reset on your how to connect brother hl l2360dw printer to wifi.

• Power the wifi printer on the pal, and click the menu key.

• Use the arrow button up and down to the network, and press the OK key.

• Use the up and down arrow to hit the network reset, then press the OK key again.

• You can now see a confirmation message; you must click on OK.

The printer must then reset the network settings and restart itself.

You can go ahead and try to connect your printer to the wifi network, once you see the home or ready screen.

Let's see if your brother printer connects to the wifi network (wireless) or not?

Step 6 – set your wifi channel on 9 or 11-

Sometimes, the right signals on random channels might not be generated by your router. So if you changed the channels to 9 or 11 it would be easier.

You can follow certain steps to turn the channels.

• Get into your Access Point Admin screen.

• From the menu, pick the wifi settings (perhaps with other names as well, depending entirely on your router model).

• Now pick the wireless channel like 9 or 11 under the 2.4 GHz network.

• Press button to save changes.

Now make another attempt over the wifi to attach it.

If you still don't connect brother printer to wifi. You will spring to phase 7.

Step 7-Try connecting your brother wifi printer using WPS or auto-configure feature-

If you've tried setting your printer to a wifi network. You are how to connect brother mfc l2700dw printer to wifi has not been able to connect to the wifi network though.

It would be best to try using the WPS feature to connect it. You need a wps powered router to use this feature.

• Turn on the wireless printer brother and access point, or wifi router.

• To reach your wifi access point or router, click the WPS button.

• Keep and release the wifi-button on your printer for 3 seconds.

How your computer will begin router synchronization. You need to leave the router and your printer safe for a while.

Once your printer is connected to the wifi, your brother's wifi printer will have a solid green wifi light on it.

Step 8–Update the firmware of the printer-

If you're how to connect brother hl 2270dw printer to wifi after pursuing the advice. It means that your printer itself has a problem.

In such a situation you can try on your router to upgrade the firmware.

You can download and upgrade the latest firmware from the official brother's website.

We are the leading assistance provider of Brother printer, we have a professional team of printer technicians so if any case you got an error like Brother Printer won't print then do not worry