Know the Process to Eliminate Canon Printer Error 1660

Know the Process to Eliminate Canon Printer Error 1660

Canon Printer Error Code 1660 is a common error code that is encountered by Canon Printer users. It indicates a typical cartridge’s error. This error occurs when you don’t install the ink cartridge accurately. When the error strike on your printing machine, it will not allow you to progress with the printing session. Due to this error, you can’t print your documents with ease. If you want to experience a hassle-free printing. Therefore, you need to remove this error as soon as possible. This blog will help you to solve your issues in a secure way without any difficulty. To experience good printing you can contact the experts they always help you to remove error code 1660 from your operating device. They will give you one of the best solutions with ease. They are always with you. So, don’t worry you can contact our professional team to gain one of the best solutions. To communicate with our talented experts call on Canon printer tech support number +(1)-888-846-5560.

Possible Reason behind Canon printer error 1660

To fix error 1660 you need to know the roots of this error. Because without knowing the reasons for this error you are unable to solve it. Then you need to know the possible reason behind this error, some of the causes are listed below:

• Improper installation of the ink cartridges.

• Misplacement of the ink cartridges.

• Damaged or clogged ink cartridges.

• If the printing machine is not eligible to recognize the ink tank then you may face this error.

Solutions to solve Canon Printer error 1660

After knowing the causes behind this error you need to remove it as soon as possible. To eliminate this error code you can apply the below-mentioned solutions. It will definitely solve your problem.

Solution 1. Reinsert the Ink Cartridge

This is a very simple solution to solve your problem. By reinstalling the ink cartridge you can overcome this error. To do this, first, replace the printer cover then check if the red light of an ink cartridge is switched off, then it means that the cartridge is not inserted accurately. So, you have to reinsert it again. Then you need to replace the cartridge and wait for a few seconds then reinsert it carefully. Make sure that the orange protective cap is replaced from the bottom of the ink cartridge. After that, press the resume/cancel button to continue with the printing process.

Solution 2. Clean and reset the ink cartridges

If the above solution fails to remove this error then clean and reset the ink cartridges to fix this problem. To clean and reset the cartridges switch off the printer and disconnect the entire cables from the printer. Then, open the lid and replace the ink cartridge carefully. Now clean it and insert it again. After that, hold the reset button for some time. Now you can see a red light blinking when the connection between the printer and ink cartridge is established. Then, click the reset key again and hold it until the green light starts to blink, release the button. Now the resetting process of the cartridge is complete. So, print a test page to check whether the process is successful or not.

If the issue still persists then don’t worry. You will be able to take the proper guidance from the experts of Canon printer support USA. The professionals help you to solve your issue. They provide 24*7 technical support.

HP Printer Support Number +(1)-888-846-5560